Quote by Sales Team: send your gerber file to svc@pcbastore.com

About us

Why Us

PCB Capabilities

PCBA Capabilities




Contact Us

How Do I Contact PCBAStore?
General, quoting & support.

Add: 6 floor, 6/A building, Xifa Yongqi science park, Tiezai road, Xixiang town, Baoan district,Shenzhen,China

Tel : 0755-27348887

Fax : 0755-27349876

E-mail : svc@pcbastore.com

  • Aluminum PCB substrate the same as the printed circuit board

    It is common in LED lighting products.There are pros and cons, the white side is the welding LED pin, the other side is aluminum, and the thermal conductivity is usually applied to the thermal conduction part.There are ceramic substrate and so on.

    2018-01-09 Fannie 736
  • What is the relationship between hole and solder mask

    As you know , i do not only make PCB board , but also assembly the parts on PCB board . Then what are the steps of assembly PCB board ?

    2018-01-09 Emma 1368
  • What are the steps of assembly PCB board ?

    As you know , i do not only make PCB board , but also assembly the parts on PCB board . Then what are the steps of assembly PCB board ?

    2018-01-09 Emma 714
  • How to solder onto PCB

    When you have the PCB and parts , you want to assembly them , then how to solder onto PCB ? Very simple , check following .

    2018-01-09 PCBA Store 588
  • What is BGA of PCB board ?

    BGA is kind of package , called Ball Grid Array . uses a different approach to the connections to that used for more conventional surface mount connections.

    2018-01-09 Emma 900
  • Why and How to choose proper surface finish type for your PCB

    As we all know, PCB's have copper finishes on their surface. If they are left unprotected then the copper will oxidize and deteriorate, making the circuit board unusable.

    2018-01-09 Byron 549
  • What’s Rigid Flex Circuits And Why?

    Many engineers may not design all PCB types because of different electronics filed that they focus on. In this article, you’ll learn more about Rigid flex circuits design.

    2018-01-09 Byron 666
  • What PCB materials are widely used and How?

    Different products have different requirements on the PCB base material. With the development of electronic technology, PCB base material meet more and more challenges, which also push the development of copper clad laminate(CCL).

    2018-01-09 Byron 578
  • What Inspection Methods are often used in PCB Aseembly

    Inspection is crucial to ensure high quality products are delivered to customers. Few things are more frustrating to a customer than an ‘out-of-box’ or premature failure due to an avoidable fault.

    2018-01-09 Byron 528
  • How and Why to manufacture your PCBs in a panel array

    PCB is normally showed as single Piece in drawing after design, and make it as single piece in the production as well, However, many electronics engineers new to PCB industry don’t really know how and why to design and manufacture their PCBs in a panel array, and their manufacturing partners may not tell their more about production processes and pricing model of panel production.

    2018-01-09 Byron 558
  • Good PCB Stack-Up For Multilayer PCB

    Stack-up refers to the arrangement of copper and insulating layers that make up a PCB prior to board layout design. For multilayer PCB, general layers include ground plane (GND plane), power plane (PWR plane), and inner signal layers,which describes the basic construction of a PCB.

    2018-01-09 Byron 594
  • Learn About Different Types of PCBs and Their Advantages

    A printed circuit board (PCB) is a thin board made from fiber glass, composite epoxy, or other laminate materials. PCBs are found in various electrical and electronic components such as beepers, radios, radars, computer systems, etc. Different types of PCBs are used based on their applications. So what are the various types of PCBs?

    2018-01-09 Alina 603
  • The Methods of Avoiding Silkscreen Errors in PCB Manufacturing

    Misrepresented components: If a silkscreen doesn’t accurately represent its intended components, it can lead to confusion for the technicians doing debug or modifications.

    2018-01-09 Alina 579
  • Do You Know About Aluminum PCBs?

    Printed circuit boards (PCBs) can be made from various metals. These special PCBs are known as a metal core printed circuit boards (MCPCBS).

    2018-01-09 Alina 754
  • What PCB materials are widely used and How?

    It determines the PCB board performance and scope of application. Different products have different requirements on the PCB base material.

    2017-11-30 Byron 1015
  • What are the main materials of FPC flexible circuit board?

    Flexible Circuit board (FPC) is a highly reliable, Flexible Printed Circuit board with polyimide or polyester film as base material.It has the characteristics of high density, light weight, thin thickness and good bending.

    2017-11-30 peter 1872
total 5 pages