PCBA Store Blog

PCB Gold Fingers are the narrow, long, thin, and columned connections on the edge of a printed circuit board and whose purpose is to enable the board to connect with others.

A ceramic substrate is a type of material used in the production of electronic components. Ceramic substrates are typically made from alumina, zirconia, or mullite and can be found in different forms such as thin films, sheets, wafers, and more.

A Bluetooth circuit is considered the ground of the Bluetooth and comprise of various components, including capacitors, integrated circuits, and power source. The Bluetooth circuit also possesses backed wired-in audio, Bluetooth modules, among others.

The black printed circuit board is a black-colored circuit board whose solder mask is black. This mask coating is necessarily the only black material on PCB board, although other materials can also be black.

A PCB mount transformer is an elemental component of running computer boards. Through induction, a board mount transformer transfers power from one circuit or device to another. The device is compact, reliable, and durable as long as you treat them carefully.

It is obvious that capacitors store energy and it is among the different applications for supplying energy to circuit, similarly to any battery. The issue here is that capacitors have low energy density compared to batteries as they can't pack much energy similarly to the equally sized chemical batteries

This article will answer all your diodes-related queries and give you a detailed overview of its various types, applications along with how it is tested.

Custom shielding has become an essential part of the PCB and electrical industry. The reason for the growing demand is the use of digital circuits in most devices.

Solder paste, which is a mix of small metallic balls and flux is now preferred for use in most large-scale PCB assemblies. The accuracy of stencil printers and the versatility of jet printers ensure that the finished PCB is durable and functions as per requirements.

The appropriate grounding is an essential deliberation for every PCB board. Despite that, this concept is literally confusing, and its implementation can be tricky. Fortunately, comprehending the current flow and utilizing techniques and practices stressed in this piece can help.

A solder pad is a designated surface you get to see on a board of an integrated circuit die. They are the small surface of copper in PCBs that allows soldering the specific component to the board.

PCB impedance calculation refers to the calculation of the approximate impedance dimension of a PCB board. The calculation is important as it helps engineers and designers to be precise when designing circuit boards.

Reflow soldering is a simple process that employs solder paste in molten form in order to connect electrical components to the PCB board, it can be vital to making sure that PCB components are wholly and strongly soldered

Rapid PCB Prototyping is actually a process consisting of different methods that you can use for prototyping the products. The prototype, in turn, can again be used for validation of the final outcome.

ITAR compliance is essential for companies involved in PCB manufacturing as well as PCB Assembly. An ITAR compliance means that you are registered with the Directorate of Defense Trade Control.